Original Diagnostic Tool Tour cars DFH - YL9

The Geniscan VAG405 Scanner is an OEM level diagnostic tool with extra features for VW, Audi, SEAT and Skoda vehicles. Basic functions like reading & erasing of error codes can be performed on all OBD2 & CAN-BUS vehicles. It will perform advanced functions on VW, Audi, Seat & Skoda vehicles like reseting service lights on the engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer & more.

The VAG SCANNER VAG405 Code Reader is specially designed to work with all VAG VW, AUDI, Skoda, Seats including those equipped with the newly released Controller Area Network(CAN) protocol. Though it is small, it is capable of retrieving same information as large expensive scanners. If your car's Check Engine Light is on, you need this device.

This VAG Code Reader is a handy device for car-owners, DIY customers and even professional technicians to read VAG diagnostic trouble codes (DTCs) from the on-board computers (ECUs) of 1990 and newer VAG based vehicles. With this smart reader, you are able to immediately self-troubleshoot the cause of the "Check Engine" light wherever you are.

The Code Reader will also enable the user to erase the trouble codes and shut off (reset) the check-engine light as soon as the vehicle is repaired.

Features and Benefits

• Read and erase trouble codes & reset service lights. Advanced functions on VW, Audi, Seat & Skoda vehicles: Engine, ABS, Airbags, Transmission, Radio, Climate Control, Instruments, Immobilizer & more (18 systems).
• Compatible with the following protocols: ISO 9141-2 (CARB), ISO 14230 (KWP2000), ISO 15765 (CAN-BUS).
• Turns off MIL lights of engine, airbags, ABS, A/T and most other systems.
• CAN-BUS compatible.
• Resets the Oil Service Light.
• Retrieves VIN.
• Displays Codes & Definitions on the Large Backlit LCD Screen.
• Upgradable via the internet using the Serial Cable.
• Plug & Play, easy to use.
• Small and portable.
• 1 year warranty.
• Dimensions: Head unit: 7 inches x 3 inches x 1 inches.

Protocols

• VW's proprietary diagnostic protocol, ISO 9141-2 (CARB)
• ISO 14230 (KWP2000)
• ISO 15765 (CAN-BUS)

Easy To Use:

1. When your "Check Engine" light or "Service Engine Soon" lights up, stop the car and apply the parking brake.
2. Start the engine, and then plug the code reader into the 16-pin diagnostic socket (OBD-II connector) usually located under the instrument panel in the car.
3. Push the Read button and the unit automatically gets the Diagnostic Trouble Codes (DTCs) in less than 10 seconds.
4. Identify the trouble codes and retrieve their detailed descriptions by looking up the Diagnostic Trouble Codes(DTCs) list in the enclosed user manual.
5. Know what is wrong and save yourself lots of money!!!!

What's In The Box?

• Head Unit
• Nylon Case
• OBD2 Cable
• USB Cable
• User Manual
• Retail Box